Bosch GCC30-4 Operating/Safety Instructions Manual page 12

H
Attaching GCC30-4
Use a commercially available two-part adhesive (not supplied) for attachment of
the GCC30-4 to a power tool or industrial asset. Observe all processing instruc-
tions from the adhesive manufacturer. The use of other adhesives may be ade-
quate depending on the application and environment. Choosing the right adhesive
composition will create a long lasting bond between the GC30-4 and the tool.
Prepare the bonding surface in accordance with the instructions from the
manufacturer of the two-part adhesive. If the power tool is not properly cleaned
before bonding, the material properties could change, potentially leading to dam-
age.
It must be ensured that attaching the GCC30-4 does not limit the proper and
safe use of the power tool at any time. Attaching a GCC30-4 at the following
locations is prohibited (see figure J):
– Protective guards,
– Ventilation openings,
– Components that are actively operated (e.g. switches, controllers, inlets, etc.)
– Moving or rotating components,
– Labels/nameplates,
– Operating panels and grip surfaces,
– Soft grip surfaces,
– Surfaces in the direct vicinity of sparks,
– Surfaces that are exposed to strong mechanical or thermal effects,
– Surfaces that ensure that the power tool is positioned safely,
– Surfaces that could be damaged by adhesive components.
12
4
1
10
3
I