Setting The Clock - LG SB74 User Manual

Setting the Clock

1 Turn the power on:
2 Press for at least 2 seconds:
3 Choose from either:
AM 12:00 (for an AM and PM
display) or 0:00 (for a 24 hour
display)
4 Confirm your selection:
5 Select the hours:
6 To confirm:
7 Select the minutes:
8 To confirm:
SB74-A.AKAZLL_ENG_3827.indd 9
ON UNIT ON REMOTE
POWER
1/&
CLOCK -
"II/ii"
.bb/BB>
SET -
"II/ii"
.bb/BB>
SET -
"II/ii"
.bb/BB>
SET -
Setting the clock - more you can do
Using your player as an alarm clock
1 Press and hold TIMER. Each functions flashes.
2 Press SET when the function you want to be woken by is showing.
- If you choose "TUNER" you will be shown the stations you have
saved as presets. Use "II/ii" on the unit to select the station you
want, Then press SET on the unit.
3 "ON TIME" will be displayed. This is where you set the time you want
the alarm to start.
Use "II/ii" to change the hours and minutes and press SET to save.
4 The "OFF TIME" will be displayed. This is where you set the time you
want the function to stop.
Use "II/ii" to change the hours and minutes and press SET to save.
5 You will be shown the volume (VOL) you want to be woken by. Use
"II/ii" to change the volume and SET to save. Switch the system
off. The clock icon " " shows that the alarm is set.
6 When the system is turned off you can check the time the alarm and
turn the alarm on and off by pressing TIMER.
Note:
• You have to turn off the unit to use the alarm function.
• If you disconnect the power cord or remove the batteries, the alarm
function is not available.
• The time set previously is deleted when power cord is pulled out.
9
11. 05. 12 3:41