At" Commands And "S" Registers Exclusive To The Pe2400; Ampersand (At&) Commands; Percent (At%) Commands - Siemens 1015N-2MFM-1A Field Manual

Appendix A
Command Factory Default
&Dn n = 0
&Jn n = 0
Command Factory Default
%Dn n = 0
%Ln n = 0
"AT" COMMANDS and 'S" REGISTERS
EXCLUSIVE TO THE PE2400
Ampersand (AT&) Commands
Data Terminal Ready Option. &Dn controls the Data Terminal Ready (DTR) options.
Parameters: n = 0, 1, 2, 3
n = 0 Modem ignores DTR (factory default)
n = 1 Modem assumes command state when ON-to-OFF transition Is detected
on DTR.
n = 2 Modem hangs up, assumes command state and disables auto-answer
upon detecting ON-to-OFF transition on DTR.
n = 3 Modem assumes initialization state upon detecting an ON-to-OFF transition
on DTR.
Result codes: OK
Auxiliary Relay Control. &Jn determines how the auxiliary relay is controlled.
Parameters: n = 0.1
n = 0 The auxiliary telco relay is commanded to stay open. Suitable for RJ-11,
RJ-41 S, or RJ-45S type phone jack (factory default).
n =1 The auxiliary telco relay is controlled by off-hook/on-hook. If the modem is
off-hook, the relay is commanded to close (connecting A to A1); if the modem
is on-hook. the relay is commanded to open (disconnecting A from A1).
Suitable for RJ-12 or RJ-13 type phone jacks.

Percent (AT%) Commands

DTMF Attenuation. %Dn command sets the DTMF transmit level attenuation.
n = 0
n =1
n = 2
n = 3
n = 4
n = 5
n = 6
n = 7
Transmit Attenuation. %Ln command sets the transmit level attenuation.
n = 0
n = 1
n = 2
n = 3
n = 4
n = 5
n = 6
n = 7
Parameters / Descrlptlon
Parameters / Descriptlon
0 dB attenuation
2 dB attenuation
4 dB attenuation
6 dB attenuation
8 dB attenuation
10 dB attenuation
12 dB attenuation
14 dB attenuation
0 dB attenuation
2 dB attenuation
4 dB attenuation
6 dB attenuation
8 dB attenuation
10 dB attenuation
12 dB attenuation
14 dB attenuation
A-6
1015N-2MFM-1A