Mer Mode - Siemens ADSL 50 User Manual

4 eth & wlan router
Hide thumbs Also See for ADSL 50:
Table of Contents

Advertisement

SANTIS ADSL 50/500 User Manual

MER Mode

PPPoE Clent
Description:
In this deployment environment, we make up a private IP network of 192.168.1.1. NAT function is enabled to support
multiple clients to access Internet.
In this example, the ADSL Router acts as NAT device, which translate a private IP address into a public address.
Therefore multiple users can share with one public IP address to access Internet through this router. The public
address can be a static public address that is pre-assigned by ISP or a dynamic public address that is assigned by ISP
DHCP server.
Configuration:
1.
Start up your browser and type 192.168.1.1 as the address to enter this ADSL web-based manager.
2.
Go to Advanced User > Configuration > WAN Configuration > Create a new PVC and select the Data
Mode –RFC1483 MER. Then click Next button.
3.
Enter the VPI/VCI values provided by your ISP and select the encapsulation type as LLC/SNAP or VC MUX.
Then click Apply.
4.
Set IP configuration for Local WAN IP Address. Choose Specify an IP Address item. Please set as the
following example,
IP Address: 10.3.86.105 (should be the one that you get from ISP)
Subnet Mask: 255.255.255.0
5.
Go to Configuration > IP Route and click Create a new route to add a new route. Configure the settings as
the following example,
Destination Address:
Netmask:
Forward packets to:
Then click Apply.
6.
Go to Configuration > DNS and enable DNS Relay setting and click Next. On the DNS Relay web page, enter
the DNS Server IP address, for example 168.95.1.1 (you should get this value from your ISP).
7.
Save the configuration from System >Save Configuration and System >Restart to restart your router for
initiating these settings.
8.
Then you have set the web configuration successfully. And you can surf on the Internet.
62
Default Private IP
PC(s)
192.168.1.1
MER
Mode
S/W
ADSL
Router
Public IP assigned
by BRAS
BRAS
leave default
leave default
Gateway Address: 10.3.86.1 (you should get this value from your ISP)
STM-1
Loop
BRAS
DSLAM
MER
Broadband Remote Access Server
ISP
AAA
RADIUS
Server

Advertisement

Table of Contents
loading

This manual is also suitable for:

Adsl 500Santis adsl 50/500

Table of Contents