Battery Operation - Silvercrest KH 2217 Operating Instructions Manual

Battery operation:

To save energy, the display illumination is deactivated in battery
operation.
1. Press the button
The display is illuminated for ca. five seconds.
Projection of the time
For the time display to be well visible on a wall or ceiling, the room must
be darkened.
Important:
The time display projection is created with an LED.
NEVER look directly at the lightbeam. NEVER direct the lightbeam at
other people or animals.
Mains power operation:
1. Press the button
The projection lens glows permanently.
2. Swivel the projection lens in the desired direction.
The time is projected onto the selected position. The projection
distance ranges from ca. 0,4 m to 4,0 m
3. Adjust the sharpness of the projection with the slider
You can turn the projection of the time through ca. 90° with infinite
variability.
4. Turn the adjustment wheel
You can turn or mirror the projection of the time through 180°.
5. Press the button
6. To switch the projection off, press the button
again. The projection lens extinguishes.
SNOOZE/DISPLAY DIMMER
PROJECTION ON/OFF
ROTATE PROJECTION
PROJECTION REVERSE
- 18 -
.
.
.
.
PROJECTION ON/OFF
FOCUS
.
once