Table of Contents
Advertisement
Assembly
Then, bring the front panel
enter the holes on the right edge of the side panel.
When done, screw all three adapter sleeves
clamped into the adapter sleeves and the panels are seated fi rmly together and at right angles.
Step 3
Take the centre front panel
Then place four adapter sleeves
so that the arrows on the adapter sleeves each point to the outer edge of the centre front panel
Insert four double locking pins
E
sleeves
Step 4
Now connect the so prepared centre front panel
For this, insert two adapter sleeves
with the screwdriver so that the arrows on the adapter sleeves each point to the outer edge of the side
panels.
Then, guide each of the double locking pins
in the edges of the side panels.
When done, turn all four adapter sleeves
until all parts are at right angles to each other and fi rmly tightened.
SEKU 2000 A1
and side panel
4
and lay it face down.
5
E
in the four large holes. Turn the adapter sleeves with the screwdriver
in the upper holes on the front sides of the panel and turn the adapter
C
with the screwdriver to the right until the locking pins are fi rmly secured.
C
E
E
8
together at right angles, so that the locking pins
E
to the right with the screwdriver until the locking pins are
E
5
with the side panels prepared in steps 1 and 2.
5
in the large holes in the side panels. Turn the adapter sleeves
of the centre front panel
C
E
in the centre front panel
5
5
C
into the corresponding holes
5
with the screwdriver to the right,
5
E
D
GB
IE
.
E
11
Advertisement
Table of Contents
