Canon imageRUNNER 2545i Remote Ui Manual page 45

6
Reset the passwords ➞ click [OK].
2
Change Password:
(for the User ID)
Change Password:
(for the Department
ID)
User Type:
2-20
Importing and Exporting Data
Select this check box and enter the password for the User ID in
the [Password] and [Confirm] text box.
NOTE
You can enter the new password for the User ID instead of entering the old
(before importing) password.
Select this check box and enter the password for the
Department ID the User ID belongs to in the [Password] and
[Confirm] text box.
Specify the User Type by selecting the [User] (End User) or
[System Manager] option button.
IMPORTANT
All the user IDs are registered or overwritten as 'User' (End User) when the
machine imports User Management data, so you may need to reset the User
Types. If the User Types of all the User IDs are set to 'User' (End User), Every
user is regarded as the System Manager and will be able to log in to the Remote
UI in the System Manager Mode.