Siemens S7-1500 Manual page 24

Technical specifications
Output voltage
For signal "1", min.
Output current
For signal "1" rated value
For signal "1" permitted range, min.
For signal "1" permitted range, max.
For signal "0" residual current, max.
Output delay with resistive load
"0" to "1", max.
"1" to "0", max.
Parallel connection of two outputs
For logic operations
For increased performance
For redundant control of a load
Switching frequency
With resistive load, max.
With inductive load, max.
With lamp load, max.
Total current of outputs
Current per channel, max.
Current per group, max.
Current per module, max.
Triac outputs
Size of motor starter according to NEMA, max.
Cable length
shielded, max.
unshielded, max.
Isochronous mode
Isochronous mode (application synchronized up to
terminal)
Interrupts/diagnostics/status information
Diagnostics function
Substitute values can be applied
Interrupts
Diagnostic interrupt
Diagnostics alarms
Monitoring of supply voltage
Wire break
Short-circuit
24
L1 (-1.5 V) at maximum output current; L1 (-8.5
V) at minimum output current
1 A
10 mA
15 A; max. 1 AC cycle
2 mA
1 AC cycle
1 AC cycle
No
No
Yes
10 Hz
0.5 Hz
1 Hz
1 A; see additional description in the manual
2 A; see additional description in the manual
10 A; see additional description in the manual
4
1000 m
600 m
No
No
Yes
No
No
No
No
Digital output module DQ 16x230VAC/1A ST Triac (6ES7522-5FH00-0AB0)
6ES7522-5FH00-0AB0
Manual, 09/2016, A5E34934069-AB