Adjusting The Speaker Volume; Erasing Messages - Sony SPP-A940 Operating Instructions Manual

Playing back messages (continued)

Adjusting the speaker volume

Notes
• If the volume level is at its minimum or maximum setting, four short beeps
sound.
• During the ringing, you can't adjust the speaker volume.
Tip
There are 7 steps for the volume level (1..7). The volume level is preset to 4.

Erasing messages

(ERASE)
To erase individual messages
Press (ERASE) while playing back the message that you want to erase.
Note
The display shows the total number of "new" messages. Therefore, it is reset to
"0" when you play back all new messages, even they are not erased yet. Be sure
to erase unnecessary messages before the memory becomes full.
EN
26
Answering Machine Features
To increase the base unit speaker
volume, press (VOLUME˚+) .
To reduce the base unit speaker
volume, press (VOLUME˚—) .
(VOLUME˚+)
(VOLUME˚—)
Press and hold (ERASE)for more than 2
seconds. All previously reviewed
messages are erased.