Table of Contents
Advertisement
10
Initial Power-Up
Once the batteries are installed in the unit, the Call
Button blinks and LCD display shows
Interface ENA.
If the USB Serial Interface is not to be used, press the
ESC button to exit this mode. The default status screen
will be shown on the display. If nothing is pressed, the
unit will enter sleep mode after 60 seconds and the
screen will clear.
Status Screen
The Status Screen toggles the current Frequency and
CTCSS setting continuously.
Motorola_CB200_SMBL_REV5_08242017_FCC_Test.indd 10
LCD DISPLAY
INTERFACE ENA
-ESC to EXIT-
Freq No: 6
MHZ:467.8750
CTCSS Code: 12
100.0 Hz Ana
8/24/2017 7:34:47 PM
Advertisement
Table of Contents
