Mounting The Fwt; Validating - Huawei ETS6630 Manual

Mounting the FWT

Horizontal Mounting
Place the FWT on a flat surface. Select a cool and
ventilated site for the FWT to dissipate the heat.
Vertical Mounting
1
Pull out the handset retaining clip from the slot
and turn it around. Then push it back so that the
handset will not fall down when FWT is placed
vertically.
2
According to the distance between the two
hooks (about 7.7cm), hammer two nails into the
wall and leave a 3-mm space at the end of nails.
6
3
Snap the hooks to the nails.
7.7cm

Validating

1
Press and hold
2
The power icon
signal strength icon
3
If you can make a call, it indicates that the FWT
is installed correctly.
to power on your FWT.
appears normally. The
appears normally.