D-Link DAP-1610 Quick Installation Manual page 9

DAP-1610
6. In the opened window, in the list of available wireless networks, select the
wireless network DAP-1610 (for operating in the 2.4GHz band) or
DAP-1610-5G (for operating in the 5GHz band) and click the Connect
button.
7. In the opened window, enter the network key (see WPS PIN on the
barcode label on the back panel of the device) in the Security key field
and click the OK button.
8. Wait for about 20-30 seconds. After the connection is established, the
network icon will be displayed as the signal level scale.
If you perform initial configuration of the access point via Wi-Fi
!
connection, note that immediately after changing the wireless default
settings of the access point you will need to reconfigure the wireless
connection using the newly specified settings.
Quick Installation Guide
9