Table of Contents
Advertisement
Problems and Solutions
Problems and Solutions
If you have any problems with your cordless phone, refer to the following
troubleshooting guide.
Problem
The cordless phone does
not operate and nothing
appears in the display.
Calls cannot be made or
received.
Digital calls cannot be
made or received (the
digital line (D2) cannot be
selected).
You hear beeps during a
call.
34
• Make sure the battery is properly connected inside
the cordless phone (see page 11).
• The battery may be low. Place the cordless phone
in the base and let it charge.
• Make sure the base is plugged into a power outlet
and has power.
• Make sure the telephone line is properly connected
to the base and the wall jack (see page 10).
• The battery may be low. Place the cordless phone
in the base and let it charge.
• Calls cannot be made or received during a power
failure.
• You may be outside of the talking range. Move
closer to the base.
• Make sure your gateway is connected properly and
the power is turned on. In addition, make sure your
gateway settings are configured as explained in the
gateway instruction sheet that accompanied the
cordless phone. The problem may also be due to a
temporary interruption or other failure in your digital
phone service.
• You will hear beeps during a call and LOW
BATTERY will appear in the display if the battery is
low. Place the cordless phone in the base and let it
recharge.
• You will hear beeps during a call and OUT OF
RANGE will appear in the display if you are outside
of the talking range. Move closer to the base.
Solution
Advertisement
Table of Contents
