Night Design - Siemens M55 User Manual

M55 Barracuda fug am, A31008-H6300-A40-1-4A19 (20. May 2003, 16:01)
76
Call screening
Only calls from phone numbers that
are in the Phonebook/Addressbook
or in a group are signalled audibly or
by silent alert. Other calls are merely
displayed.
If you do not accept these calls, they
are diverted to your mailbox (if set,
p. 78).
l
Display in standby mode:
when call screening is
activated.
Key tones
You can set the type of acoustic key
tone:
Click or Tone or Still
Minute beep
During a call, you will hear a beep
after every minute as a reminder of
the time elapsed. The recipient does
not hear this beep.
m Setup
L
Info tones
Set service and alarm tones:
On/Off
Extended
• End of menu,
• Maximum text length reached,
• Network connection broken.

Night design

KmK
§§Menu§
K
You can switch on the visual signals
(LEDs) on both sides of the phone for
the following functions. The LEDs
then flash in different rhythms
depending on the current function.
Play demo
All flash rhythms are displayed in
sequence. End with §Cancel§.
Incoming call
You can assign different flash
rhythms to
each group.
During call
Select a flash rhythm to flash during
the call.
Activate/deactivate tones.
If switched on, a wider
range of service tones is
available, e.g.:
Night design
Select function.
Calls,
d Other calls:
and