Beko BWH 50 LED User Manual page 7

3.2 Pipelines Connection
The dimension of each pipe part is G1/2" ; The massive pressure of inlet should use Pa as
the unit; The minimum pressure of inlet should use Pa as the unit.
Connection of pressure relief valve with the heater on the inlet of the water heater.
In order to avoid leakage when connecting the pipelines, the rubber seal gaskets provided with
the heater must be added at the end of the threads to ensure leak proof joints (see Fig.4).
Hot water outlet
Rubber seal gaskets
Screw for hot water outlet
Adjusting handle for
mixing valve
If the users want to realize a multi-way supply system, refer to the method shown in fig.5
and fig.6 for connection of the pipelines.
Triple joint
Water pool
Cold water inlet
Rubber seal gaskets
Pressure relief valve
Pressure release hole
Joint screw for cold water inlet
Shower nozzle
Hot
Cold
water
water
outlet inlet
Mixing valve
6
Power cord
Power cord
Main machine
Pressure relief valve
Water inlet valve
Shower nozzle
Water inlet valve
Running water pipe
(Fig.4)
(Fig.5)