Points To Note On Installation - Canon Staple Finisher-AA1 Service Manual

Points to Note on Installation

• Refer to "Order of the Installation of Accessories" when installing this Equipment before operation.
• Since this machine is heavy (Staple Finisher: approx. 40kg, Booklet Finisher: approx. 64kg), 2 or more persons are required
to install it. Be sure to perform the work in accordance with the standard to handle a heavy load in each country.
• When moving this Equipment after having unpacked it, be careful by placing a plate, etc. on areas with steps to prevent the
casters from hitting those steps. If the casters hit a step, the casters or the base plate may be deformed.
CAUTION:
When tightening the screws, do not tighten them too tightly. Otherwise, there is a risk of damage and deformation of screw
holes.
193
7. Installation