Connecting To A Desktop Computer - Asus Cine5 Quick Start Manual

Connecting to a desktop computer

Connect your PC Speaker to a desktop computer with 5.1-channel audio
output for a surround sound experience.
To connect your speaker to a desktop computer:
1. Locate the audio jacks at the back panel of your desktop computer.
2. Using a 5.1-channel audio cable, connect your speaker to the audio
3. Turn ON your speaker.
4. Play a media file from your desktop computer.
5. Adjust the volume of your speaker to the desired level.
Book Cine5.indb 7
Connecting your PC Speaker
WARNING: Turn OFF your speaker before connecting / disconnecting it to
/ from audio sources.
jacks at the back panel of your desktop computer.
Front Speakers Out jack
Side or Rear Speakers Out jack
Center/Subwoofer jack
IMPORTANT:
• The Side and Rear Speakers Out jacks (black or gray) vary with
motherboard/soundcard design.
• To ensure that the speaker is connected properly, run a speaker test in
5.1-channel setup in your audio configuration utility.
NOTE: The 5.1-channel audio cable is an optional item.
NOTE: We recommend that you adjust the volume of your audio source
to 90%.
to audio sources
Green
Gray
Orange Orange
Green
Gray
3
7
1/12/10 6:58:22 PM