Destination; Element Sw (Element Switch) - Yamaha MODX7 Reference Manual

Reference
Performance

Destination

Determines the target parameter to be controlled. To add another Destination, touch "+" icon. For
information on setting examples for "Destination," see below.
Settings: See the "Control List" in the Data List PDF document.
Destination Setting Examples
The following settings are some useful examples how to set the Destination.
To control the volume:
To change the pitch:
To change the speed of the Rotary Speaker:
To apply a Wah pedal effect:
Concerning *1 and *2, the following settings are necessary in addition to the above settings.
*1 "Ins A/B Type" = "Rotary Speaker" in the Effect display of Part Edit
*2 "Ins A/B Type" = "VCM Pedal Wah" in the Effect display of Part Edit
Source
Determines the desired Controller for controlling the parameter set in "Destination."
Settings:
PitchBend, Modwheel, AfterTouch, FootCtrl 1, FootCtrl 2, FootSwitch, Ribbon, Breath, AsgnKnob 1–8, AsgnSw 1,
AsgnSw 2, MS Lane 1–4, EnvFollow 1–16, EnvFollowAD, EnvFollowMst

Element SW (Element Switch)

Selects whether the controller will affect each individual Element (On) or not (Off). This is available only
when Element-related parameters are set in "Destination."
Settings: Off, On
MODX Reference Manual
Edit
Normal Part (AWM2) Drum Part
Part Param  Volume
Part Param  Pitch
Ins A/B  InsA/B SpdCtrl
Ins A/B  InsA/B PdlCtrl
Search Utility
Normal Part (FM-X)
*1
*2
Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
Copy or Exchange
Elements
101