Battery Warnings - GE XL Vu+ VideoProbe Operating Manual

2.4 Battery Warnings

Only use the battery (XLGOABATTA or XLGOABATTB) and power supply
(XLGOACHGR or XLGOAAUTOC) specified for use with the XL Vu+ system.
Before using the XL Vu+ system, thoroughly review the instructions in this manual
for using the battery and battery charger, Always observe these instructions during
use of the instrument.
WARNING!
•
Do not place the battery in fire or exceed the battery operating temperature.
•
Do not pierce the battery with nails, strike the battery with a hammer, step on
the battery, or otherwise subject it to strong impacts or shocks.
•
Do not expose the battery to water or salt water, or allow the battery to get wet.
•
Do not disassemble or modify the battery.
Battery Communication Error: If the XL Vu+ shows this error message on the
display, please contact your nearest customer support center.
Using the battery outside its recommended operating range will result in
degradation of the performance and service life. When storing the battery, be sure
to remove it from the base unit.
The recommended temperature range for Li-Ion battery operation is:
Discharge (when using the instrument): -20 to +46°C
Recharging:
Storage:
XL Vu+™ VideoProbe® Operating Manual
Chapter 2. Safety Information
0 to 40°C
-25 to +60°C
9