Cisco 350 Series Administration Manual page 183

9
STEP 3
STEP 4
STEP 5
STEP 6
NOTE
136
When this box is checked, you may not manually configure a voice network
NOTE
policy.
Click Apply to add this setting to the Running Configuration file.
To define a new policy, click Add.
Enter the values:
• Network Policy Number—Select the number of the policy to be created.
• Application—Select the type of application (type of traffic) for which the network
policy is being defined.
• VLAN ID—Enter the VLAN ID to which the traffic must be sent.
• VLAN Type—Select whether the traffic is Tagged or Untagged.
• User Priority—Select the traffic priority applied to traffic defined by this network
policy. This is the CoS value.
• DSCP Value—Select the DSCP value to associate with application data sent by
neighbors. This value informs them how they must mark the application traffic they
send to the device.
Click Apply. The network policy is defined.
You must manually configure the interfaces to include the desired manually-
NOTE
defined network policies for the outgoing LLDP packets using the LLDP MED Port
Settings.
LLDP MED Port Settings
The LLDP MED Port Settings page enables the selection of the LLDP-MED TLVs and/or the
network policies to be included in the outgoing LLDP advertisement for the desired interfaces.
Network policies are configured using the LLDP MED Network Policy page.
If LLDP-MED Network Policy for Voice Application
Auto and Auto Voice VLAN is in operation, then the device automatically generates an LLDP-
MED Network Policy for Voice Application for all the ports that are LLDP-MED enabled and
are members of the voice VLAN.
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Administration: Discovery
(LLDP MED Network Policy
Discover - LLDP
Page) is