Mitsubishi Electric GT1020 Startup Manual page 3

Gt1020/gt1030 to fr-s500(e) inverter
Hide thumbs Also See for GT1020:
Table of Contents

Advertisement

About this Manual
The texts, illustrations, diagrams and examples in this manual are only intended as aids to help
explain the functioning, operation, use and programming of the GOT1000 terminals in combi-
nation with an FR-S500 Inverter.
If you have any questions regarding the installation and operation of the hardware described in
this manual, please do not hesitate to contact your sales office or one of your Mitsubishi distri-
bution partners.
b
CAUTION:
Do not attempt to install, operate, maintain or inspect the grafical operator terminal or
the inverter until you have read through the correrponding instruction manual care-
fully and can use the equipment correctly. Do not use the inverter until you have a full
knowledge of the equipment, safety information and instructions.
You can also obtain information and answers to frequently asked questions from our Mitsubishi
website under www.mitsubishi-automation.com.
No part of this manual may be reproduced, copied, stored in any kind of information retrieval sy-
stem or distributed without the prior express written consent of MITSUBISHI ELECTRIC.
MITSUBISHI ELECTRIC reserves the right to change the specifications of its products and/or
the contents of this manual at any time and without prior notice.
© Version A November 2008
Manual References:
Refer to the following manuals for more detailed explanations. For any further questions, please
contact your local Mitsubishi Product Provider.
● GOT1000 Series Connection Manual 3/3 (SH(NA)-080532ENG), Sections 37.1 to 37.6
● FR-S 500, Frequency Inverter, Instruction Manual Detailed (IB(NA)-0600027-C)
b
CAUTION:
This Start-up Guide includes a brief summary of the main specifications of the
GOT1000 graphic operation terminals and the FR-S500 series of inverters, which
should be sufficient to enable experienced users to install and configure the units.
For further information on the operation terminals and the inverters please refer to the
above mentioned manuals.
Please observe also the safety precautions given in the manuals mentioned above.
GOT1000
I

Advertisement

Table of Contents
loading

This manual is also suitable for:

Got1000 seriesGt1030

Table of Contents