Siemens HKW-600 Manual page 4

4 of HKW-600 en, A31008-H6551-A102-1-4W28 (12.08.2004,
left page ( )
4
Direct installation of the display
First clean the area where you
want to attach the display
ing a suitable grease-dissolving
cleaning agent. The adhesive
pad will only adhere permanent-
ly to a grease-free surface.
Mount the display
adhesive pads.
Installation using the display holder
Mount the display holder
to the dashboard with the adhe-
sive pad supplied or with appro-
priate screws*.
Then press the display
the display holder
clicks into place.
Loudspeaker
The inclination and the rotation
of the loudspeaker
adjusted. Loosen the set
screw in the base, install the
8
loudspeaker
the screw.
* Not included in the Siemens standard
scope of supply.
6
us-
6
using the
7
on-
6
into
7
until it
8
can be
and tighten
Secure the loudspeaker
suitable location (such as the
passenger-side footwell).
The screws can be found in the
base of the loudspeaker
Wiring loom
Electrical connections
When connecting the Car Kit to
3
the wiring loom
the function and operation of
other devices are not compro-
mised (e.g. voltage drop).
Disconnect the car battery cor-
rectly before installing the wir-
3
ing loom and the electronics
1
box .
Connect the 12V+ line (red)
§B§
to the positive terminal of the
car battery.
Connect the line (brown) to
§D§
the negative terminal of the
car battery.
8
in a
8
.
ensure that