Fujitsu UTY-TFNXZ1 Setting Manual page 9

6
Confirm that LED 2 is flashing.
(On/off at 2-second intervals.)
Then press and hold the Setting button on
the WLAN adapter for 3 seconds.
LED 2 lighting will change.
(on/off: 2sec/2sec → 2sec/0.5sec)
Confirm that the LED 1 and 2 is both on to
proceed.
7
Press [Register] to start the connection
with the wireless router.
LED 1 and 2 will both flash 2 times, and a
message will appear when setup is com-
plete.
It may take a few minutes before the message ap-
pears on the screen.
4.3.2 Manual mode
*Lighting pattern:
1~3
See steps 1 to 3 in "4.3.1. Button mode".
4
Select [Manual mode].
Off On Flashing
(on/off = 2sec/2sec)
(on/off=2sec/0.5sec)
Register
Registration
Successful!
(2 times)
Button mode
Manual mode
En-9