Engine Oil Level Check - Husqvarna W 40P Operator's Manual

ENGINE OIL LEVEL
Check the engine oil level with the engine stopped and in a level
position.
1. Remove the oil filler cap/dipstick and wipe it clean.
2. lnsert and remove the dipstick without screwing it into the filler neck.
Check the oil level shown on the dipstick.
3. If the oil level is low, fill to the edge of the oil filler hole with the
recommended oil (see page 29).
4. Screw in the oil filler cap/dipstick securely.
NOTICE
Running the engine with a low oil level can cause engine damage.
28
CHECK
DIPSTICK
MAINTENANCE
UPPER LIMIT
LOWER LIMIT