Lower Control Panel - Sony Betacam SX DNW-A22 Operation Manual

2-1 Control Panels

2-1-2 Lower Control Panel

1 Menu/display setting section
1 Menu/display setting section
1 MENU button
2 SET button
MENU SET
3 CTL/TC/UB button
4 RESET button
1 MENU button
Use this button for setup menu operations.
Pressing this button, turning it on, displays setup
menus in the fluorescent display of the display section
2. Press the button once more to exit from the menu
display.
For details of setup menu operations, see Chapter 5, "Menu
System".
2 SET button
Use this button for setting time code and user bit
values and in setup menu operations.
For details of setup menu operations, see Chapter 5, "Menu
System".
2-4
Chapter 2 Location and Function of Parts
CH
CONDITION
VI TC UB INTRP
DF LTC VITC 4F
MENU SET CTL/TC/UB
STANDBY
EJECT REW
6 0
3 Tape transport control section
CTL/TC/UB RESET
2 Display section
DOLBY
525 625
NR
BETACAM
SX
RESET
SERVO ALARM
PLAY F FWD STOP
9 ) p
3 CTL/TC/UB button
This selects the value displayed in the fluorescent
display in the following sequence: CTL, TC, UB. As
the display changes, the corresponding indicators over
the fluorescent display also show the status.
Time code display value selection and display contents
Display Value displayed
selection
CTL Tape running time (hours,
minutes, seconds, frames)
computed from the CTL
(control) signal recorded on
the tape during playback.
TC Playback time code read by
the internal time code
reader. a)
UB User bit value inserted in the
playback time code.
a) The selection of LTC or VITC is made by the TC switch.
When VITC is selected, the VITC indicator over the TC
switch lights.
4 RESET button
To reset a CTL, time code (TC) or user bit (UB) value
displayed in the fluorescent display, hold this button
down.
Resetting the CTL value erases all edit points.
SHUTTLE JOG
REVERSE FORWARD
4 Search control section
Indicator status
TC and UB
indicators are
both off.
The TC indicator
lights and the UB
indicator goes
off.
The UB indicator
a) lights and the TC
indicator goes
off.