Connecting To Other Devices Via Lan; Connecting Using Wireless Lan Access Point Mode - Sony PXW-Z190V Operating Instructions Manual

Connecting to Other
Devices via LAN
The camcorder can connect to smartphones,
tablets, and other devices using via LAN
connection.
Making a LAN connection between a device and
the camcorder enables you to do the following
using the web remote control (page 50) or
"Content Browser Mobile" application.
• Remote operation via LAN
You can control the camcorder from a
smartphone, tablet, or computer that is
connected to the camcorder via a LAN.
• Video monitoring via LAN
You can create a stream (H.264) from the
camera or playback video of the camcorder, and
monitor the video using the "Content Browser
Mobile" application from a device via a LAN.
"Content Browser Mobile" application
You can operate the camcorder remotely on the
device screen while monitoring from the
camcorder, and configure settings of the
camcorder, using the "Content Browser Mobile"
application.
For details about the "Content Browser Mobile"
application, contact your Sony sales or service
representative.
Connecting using wireless LAN
access point mode
The camcorder works as an access point, and
connects to a device via a wireless LAN.
Smartphone/
tablet
Connecting to an NFC-compatible device
with one-touch operation
Devices that support NFC can be connected (one-
touch connection) using NFC.
1
Open [Settings] on the device, select
[More], and place a check mark in the
[NFC] checkbox.
2
Turn the camcorder on.
3
Activate the NFC function.
Press and hold (for 3 seconds) an assignable
button assigned with NFC or select Wireless
LAN >NFC in the Network menu to activate
NFC connection mode.
The NFC function is available only while
appears on the screen.
4
Touch the camcorder using the device.
The device connects to the camcorder and
"Content Browser Mobile" starts.
45
Computer