Path Settings; Displaying The Path Menu - Sony DVS-7250 Operation Software

Path Settings

These settings determine the way in which interpolation from one key frame
to the next is carried out, or in other words the nature of the path followed
between key frames. Use the following procedures.

Displaying the PATH Menu

Make the path settings for key frames created on the switcher by using the
SWER KF PATH menu. Make the path settings for key frames created on
the DME by using the DME KF PATH menu.
For details of the DME KF PATH menu, refer to the BZDM-7720/3720
User's Guide.
To display the SWER KF PATH menu, use the following procedure.
1
2
3
8-20
Chapter 8 Key Frame Effects
In the menu control section, press the KEY FRAME top menu button.
The KEY FRAME menu appears.
For details of the KEY FRAME menu display, see page 8-32.
Press F9 (SWER PATH).
The SWER KF PATH menu appears.
M/E-1 M/E-2
ALL
F1 F2 F3
Function key indications in the SWER KF PATH menu
Stop the effect at the required edit point.
The setting applies to the transition from that key frame to the next.
PGM/PST
USER
F4 F5 F6 F7 F8 F9 F10