Table of Contents
Advertisement
WPS (Default: Enable)
Select whether to use WPS function.
- Enable: WPS function is used
- Disable: WPS function is not used
• When Enable is set
WPS type (Default: Push button)
Select a type of WPS function.
- Enable only: When connect with WPS
type after pressing the WPS button of this
terminal (WPS function is not activated if
you press [Apply] button.)
- Push button: When you use the WPS button
or connect with WPS type after clicking
[Apply] button
- WPS PIN: When you connect by entering the
PIN code (8-digit number) for WPS
WPS PIN
Enter the specified PIN code.
4 Click [Apply] to save the selected WPS
setting.
The saved WPS setting is valid even after
restarting of this terminal.
Setting MAC Address Filter
1 In the top menu, click [WLAN].
2 In the submenu, click [MAC address
filter].
3 On the setting screen, set the required
items.
59
Advertisement
Table of Contents
