Toshiba e-Bridge ID Gate User Manual page 5

Warning
Don't Disassembly
and Modification
Caution
Don't remodel of this product. Toshiba TEC don't assume te responsibility for such
remodel.
Never place objects on top of e-BRIDGE ID Gate. It may cause damages.
Don't use or storage e-BRIDGE ID Gate at extreme heat or extreme cold, or the place
where temperature change is extreme
Don't use or storage e-BRIDGE ID Gate at the place where in sunlight directly or near
apparatus generate heat such as stove etc.
Don't use or storage e-BRIDGE ID Gate in an area subject to large amounts of humidity
or dust
e-BRIDGE ID Gate consists of precise electronic parts, therefore, don't use or storage
in an area where the impact and the vibration join.
Don't use e-BRIDGE ID Gate at near the equipment that generates a strong magnetic
field or radio wave.
Please pull out the power cable at once when you notice an abnormal smell and
overheating.
Please contact our shop or the service engineer when abnormality and the breakdown
occur.
e-BRIDGE is RFID Reader operating in 13.56MHz. In case of using two or more
reader/writers around e-BRIDGE ID gate, please leave space by more than 1m. Moreover,
please confirm that it is not to be near the wireless products operating in 13.56MHz.
MIFARE is a contactless IC card technology developed by Royal Philips Electronics.
MIFARE is a trademark of Royal Philips Electronics.
Never try to disassemble, modify or repair the e-BRIDE ID Gate
in any way. High voltage inside creates the danger of electric
shock.
Before Getting Started 4