System Set-Up - Kenwood TK-5810H Service Manual

TK-5810H
Before Reading About System Set-up
The TK-5810H(B) is a transceiver main unit (without a
panel or speaker) that you complete by adding options.
The options are classified into three types according to
operation and function.
Merchandise received
License and frequency allocated by FCC
Choose the type of transceiver
TK-5810H(B) is complete by combining options
with only the transceiver body (without panel)
Are you using the remote kit?
See page 13*
Please refer to the
KCH-14/15 service manual
(B51-8728-00) for serving
information, such as circuit
diagram, parts list and etc.
KCH-14 (Basic model)
Front panel kit
Are you using the printed keytops?
See page 13*
Supplied accessory keytops
Note :
* For the sections where it says "See page XX", refer to the manual of
TK-5810(B)(B51-8780-00).
4
( )
B

SYSTEM SET-UP

YES
NO
See page 13*
Please refer to the
KCH-14/15 service manual
(B51-8728-00) for serving
information, such as circuit
diagram, parts list and etc.
KCH-15 (Full-featured
model) Front panel kit
NO
YES
Transceiver programming
KCT-23 DC cable
Are you using the voice guide & storage unit?
NO
Are you using the external speaker?
NO
Are you using the keypad microphone?
NO
Delivery
1. Install the front panel kit (controller) directly on a radio to
operate it. (Form : Radio + KCH-14/15)
2. Remotely control one radio with one controller. (Form
: Radio + KRK-5 + KCH-14/15 + KCT-22M/M2/M3)
3. Remotely control one radio with two controllers. (Form
: Radio + KRK-6DH + KCH-14/15 (two) + KCT-22M/M2/
M3 (two))
Frequency range RF power
450~520MHz 50~100W TK-5810H(B) K
400~470MHz 50~100W TK-5810H(B) K2
Are you using one radio with two controllers?
Are you using one radio
with one controller?
See page 14*
YES
Please refer to the
KRK-5/6DH service manual
(B51-8445-20) for serving
information, such as circuit
diagram, parts list and etc.
KRK-5
Single control head remote kit
(Option)
or
KCH-14 KCH-15
KCT-22M/M2/M3
Control cable
See page 5*
A personal computer (IBM PC or compatible), programming
interface (KPG-43/43A), USB adapter(KCT-53U), and programming
software (KPG-95D) are required for programming. (The frequency
and signaling data are programmed for the transceiver.)
KCT-23 M2,M4 : TK-5810H(B)
YES
VGS-1
YES
KES-5 or KES-6
YES
KMC-28
Type
YES
See page 16*
Please refer to the
KRK-5/6DH service manual
(B51-8445-20) for serving
information, such as circuit
diagram, parts list and etc.
KRK-6DH
Dual control head remote kit
(Option)
or or
KCH-14 KCH-14 KCH-15
+ + +
KCH-14
KCH-15 KCH-15
See pages 15 and 16*
See page 18*
(Option)
See page 18*
(Option)
(Option)
Desk top microphone KMC-9B
Service manual parts No. list
Model Parts No.
KRK-5/6DH B51-8445-20
KCH-14/15 B51-8728-00