Technology / model
Location / Function of the Display and Operating Elements
A1
A2
A3
A4
A5
A6
A7
A8
Product documentation
Additional information like operating and mounting instruction, application program descrip-
tion, Product database, additional software, product image, CE declaration etc. is available
here:
http://www.siemens.com/gamma-td
Notes
Safety
DANGER
· The device must be mounted and commissioned by an authorized electrician.
· When connecting the device, it should be ensured that the device can be isolated.
· The device must not be opened.
· For planning and construction of electric installations, the relevant guidelines, regulations and
standards of the respective country are to be considered.
Mounting
à Brightness measurement in particular
The daylight measurement determines an average brightness value in the room, which can differ from
the brightness on the worktop. You should therefore avoid mounting sites with extreme light ratios.
If the detector is fitted near lights with a high proportion of indirect light, the artificial light level at the
detector mounting point must not exceed the wanted nominal lighting level in the room. This can be
compensated by increasing the separation between the light cone and the detector. For constant lighting
control, direct artificial light on the detector should be avoided.
It is recommended to orientate the programming button of the device to the window, if possible. With
increasing mounting height the sensitivity of the brightness measuring is reduced.
6 / 12
Update: http://www.siemens.com/gamma-td
January 2015
Device
Fixing clamps
Detector lens
Programming button
Shade
Bus terminal
Design ring
Programming mode LED behind lens
UP 258E22, UP 258D12, UP 255D21
ã Siemens AG 2015
Subject to change
A6
A4
A8
Siemens AG
Building Technologies Division
Control Products and Systems
P.O. Box 10 09 53, D-93009 Regensburg
A1
A2
A3
A5
A7