Advertisement
—
Making a crimp
Smart™ Connector
• Scan Smart™ Connector under RFID scanning location
• Tool will recognize lug and display connector size
• Insert and position properly stripped conductor into connector
• Place connector in crimp head
• Jog trigger until connector is tightly in place and Red indicator flashes
• If crimp indenter needs to be re-opened, press and hold backup release valve
• Hold tool securely, press and hold trigger
• When cycle is complete, indenter will retract and indicator will light:
Standard Color-Keyed
• Use Cu/Al toggle button to select material
• Use up/down arrow buttons to select connector size
• Insert and position properly stripped conductor into connector
• Place connector in crimp head
• Jog trigger until connector is tightly in place and Red indicator flashes
• If crimp needs to be re-opened, press and hold backup release valve
• Hold tool securely, press and hold trigger
• When cycle is complete, indenter will retract and indicator will light:
Steady Green:
Successful crimp
Flashing Red:
Distance or max pressure not met
Steady Red:
Failed crimp
Connector
®
Steady Green:
Successful crimp
Flashing Red:
Distance or max pressure not met
Steady Red:
Failed crimp
5
Intro
Scan
Transfer
Review
Upload
Advertisement
