Qualified Personnel; Safety Instructions For Protect 1 - AEG PROTECT 1 Series Operating Instructions Manual

♦ Verify that the unit is disconnected from the power supply
♦ Earth and short-circuit the unit
♦ Provide protection by covers or barriers for any
neighbouring live parts
3.3

Qualified Personnel

The PROTECT 1. may only be transported, installed,
connected and serviced by qualified personnel who are familiar
with the pertinent safety and installation regulations. All work
performed must be inspected by responsible expert personnel.
The qualified personnel must be authorised by the responsible
safety officer of the installation to perform the work required.
Qualified personnel is defined as personnel
♦ having completed training and gained experience in the
respective field,
♦ familiar with the pertinent standards, rules and
regulations and accident prevention regulations,
♦ having received instruction on the mode of operation and
operating conditions of the PROTECT 1.,
♦ capable of recognising and preventing dangers.
Regulations and definitions for qualified personnel can be found
in DIN 57105/VDE 0105 Part 1.
3.4

Safety Instructions for PROTECT 1.

The UPS is live, and the voltage can be
dangerous. The unit may only be installed and
if necessary opened by trained and qualified
personnel. Repairs may only be carried out by
qualified customer service staff!
The output can be live, even when the UPS is not
connected to the mains supply!
For health and safety reasons, the unit must be
earthed correctly!
17