Displaying System Information; Restoring Default Settings In The Setup Utility; Exiting The Setup Utility - HP Mini User Manual

Displaying system information

The following procedure explains how to display system information in the Setup Utility. If the Setup
Utility is not open, begin at step 1. If the Setup Utility is open, begin at step 2.
1.
2.
3.

Restoring default settings in the Setup Utility

The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is
not already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1.
2.
3.
4.
The Setup Utility default settings go into effect when the computer restarts.
NOTE:
default settings.

Exiting the Setup Utility

You can exit the Setup Utility with or without saving changes.
After either choice, the computer restarts in Windows.
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/
To select an item, press enter.
To close a text box or return to the menu display, press esc.
To display additional navigation and selection information while the Setup Utility is open, press
f1.
Open the Setup Utility by turning on or restarting the computer, and then pressing
"F10 = BIOS Setup Options" message is displayed in the lower-left corner of the screen.
Select the Main menu. System information such as the system time and date, and identification
information about the computer is displayed.
To exit the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit
Discarding Changes, and then press enter.
Open the Setup Utility by turning on or restarting the computer, and then pressing
"F10 = BIOS Setup Options" message is displayed in the lower-left corner of the screen.
Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.
When the Setup Confirmation is displayed, press enter.
To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving
Changes, and then press enter.
Your password, security, and language settings are not changed when you restore the factory
To exit the Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press
arrow keys to select Exit > Exit Saving Changes, and then press enter.
To exit the Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press
arrow keys to select Exit > Exit Discarding Changes, and then press enter.
esc to return to the menu display. Then use the
esc to return to the menu display. Then use the
Using the Setup Utility
f10 while the
f10 while the
69