Speed Speed; Timer Timer; Mode Wind Change Functions; Osc Oscillation - AEG VL 5569 LB Instruction Manual

NOTE:
• When switching on for the first time after you have
connected the mains plug to the mains outlet, the fan
works in NOR (normal) mode with a low speed (LO).
• After switching off and on again using the ON/OFF
button, the appliance continues working in the last set
mode.
SPEED Speed
Press the SPEED button to select one of the three different
speeds.
• LO low
• MI medium
• HI high
TIMEr Timer
If you want the timer to switch the device off, press the TIMEr
button.
NOTE:
Every press of the TIMEr button increases the operating
time by 30 minutes.
Maximum shut-off time: 7.5 hours.
MODE Wind Change Functions
The device has the two special functions: NAT (NATURE) and
SLE (SLEEP). The speed of the fan buries between the func-
tions.
Press the MODE button to switch these functions on.
• NAT Natural Mode
- If the HI (high speed) setting is selected, the speed
alternates between high– medium – low – off.
- If you have selected MI (medium speed), the speed
alternates between medium – low – off.
- In the LO (low speed) setting, the speed alternates
between low - off.
• SLE Sleep Mode
- If HI speed is set: The fan works in the first
30 minutes as in "Natural Mode" at the HI speed
setting. In the subsequent 30 minutes the fan works
as in "Natural Mode" at the set MI speed. For the
remaining time the fan works as in "Natural Mode" at
the speed setting LO.
- If MI speed is set: The fan works for the first
30 minutes as in "Natural Mode" at the speed setting
MI. For the remaining time the fan works as in "Natural
Mode" at the speed setting LO.
- If LO speed is set: Switching between low speed and
shut-off of the fan as in "Natural Mode".
• Select the NOR (NORMAL) function to return to normal
operation.
OSC Oscillation
• If you select the OSC function the device oscillates auto-
matically through a range of approximately
60 degrees.
• In order to switch the function of, press the OSC
button again.
MOIST Mist
The humidifier can be switched on and off regardless of the
fan mode.
Press the MOIST button to select the intensity of the mist:
• LO low
• MI medium
• HI high
• To deactivate the function, press the MOIST button again.

refill water

When you want to refill the tank:
• Switch off the appliance.
• Disconnect the plug from the mains.
• If necessary, pour the remaining water out of the tank.
• Proceed as described under "Fill with water".

Shutting off

If you want to shut off the fan:
• Switch off the appliance.
• Disconnect the plug from the mains.
• Empty the water tank and the base of the humidifier if you
do not plan to use the appliance for a lengthy period.

Cleaning

WArNING:
• Always remove the mains plug before cleaning the
device.
• If you need to remove the protection grid: Always
switch the device of and remove the mains plug.
• Under no circumstances should you immerse the device
in water for cleaning purposes. Otherwise this might
result in an electric shock or fire.
CAuTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.

Housing

• Clean the outside of the device with a dry cloth without
any additives.
• If the device is very dirty wet a cloth with water and then
wipe the device dry once you have inished.

Water tank

• Rinse the tank with clean water.
• Allow the tank to dry before closing it again.
English
43