Table of Contents
Advertisement
MCD Evaluation Board for Pump Motor Control Reference Guide
6. Usage
This chapter describes the quick start procedure or the product. Perform steps (1) to (9) in
that order.
The product includes a 42BLF BLDC motor manufactured by ACT motor.
Motors must be hall sensor BLDC type for normal working.
Quick start procedure
Step
Item
(1)
Check the R/M exterior
(2)
Connect the motor to the board
(3)
Connect the stabilized power supply
(4)
Check the R/M control switch, Start set to "H"
(5)
Supply power, and check Power LED "lighting"
(6)
Switch: Start, set to "L", change variable resistor and enable motor rotation
(7)
Confirm changes variable resistor, the motor rotation speed change
(8)
Stop motor rotation, and finished the operation check
If an Error Occurs
1, Power supply LED no "lighting", check power supply cable and voltage.
2, Motor no rotation, check motor connection, Control switch set.
© 2017 Toshiba Electronic Devices & Storage Corporation
9
Advertisement
Table of Contents
