Deutsch Klassifizierung der Sicherheitshinweise Dieses Handbuch enthält Hinweise, die Sie zu Ihrer persönlichen Sicherheit sowie zur Vermeidung von Sachschäden beachten müssen. Die Hinweise zu Ihrer persönlichen Sicherheit sind durch ein Warndreieck hervorgehoben, Hin- weise zu alleinigen Sachschäden stehen ohne Warndreieck. Je nach Gefähr- dungsstufe werden die Warnhinweise in abnehmender Reihenfolge wie folgt dargestellt.
Page 6
Deutsch Hinweis ist eine wichtige Information über das Produkt, die Handhabung des Produktes oder den jeweiligen Teil der Dokumentation, auf den be- sonders aufmerksam gemacht werden soll und deren Beachtung wegen eines möglichen Nutzens empfohlen wird. Betriebsanleitung (kompakt) ANT793-6MN A5E01116925B-03...
Das Gerät (und dessen Bauteile) darf nur entsprechend der im Kata- log oder der Betriebsanleitung beschrieben Verwendung eingesetzt werden. Es darf nur mit Geräten oder Komponenten anderer Herstel- ler kombiniert werden, wenn diese Komponenten durch Siemens frei- gegeben wurden. Eine korrekte und sichere Funktion des Geräts ist nur dann sicherge- stellt, wenn es entsprechend der Empfehlung transportiert, aufbe- wahrt, aufgestellt, installiert, benutzt und gepflegt wird.
Page 10
Deutsch Qualifiziertes Personal Inbetriebsetzung und Betrieb eines Gerätes dürfen nur von qualifi- ziertem Personal vorgenommen werden. Qualifiziertes Personal im Sinne der sicherheitstechnischen Hinweise dieses Handbuchs sind Personen, die die Berechtigung haben, Geräte, Systeme und Strom- kreise gemäß den Standards der Sicherheitstechnik in Betrieb zu nehmen, zu erden und zu kennzeichnen.
• Abschlusswiderstand TI795-1R • Betriebsanleitung (kompakt) Überprüfen Sie die Vollständigkeit der Lieferung. Setzen Sie sich bei unvollständiger Lieferung oder bei äußeren Beschädigungen mit Ih- rem Lieferanten oder der örtlichen Siemens-Geschäftsstelle in Ver- bindung. Verbindungsleitung N-Connect/R-SMA Zum direkten Anschluss der ANT793-6MN an einen SCALANCE W-700 ist die flexible Verbindungsleitung N-Connect/R- SMA Male/Male als Zubehör lieferbar.
Page 12
Deutsch Flexible Verbindungsleitung N-Connect/ N-Connect Zur Verbindung der ANT793-6MN mit dem Blitzschutzelement LP798-1N ist die flexible Verbindungsleitung N-Connect/N-Connect Male/Male als Zubehör lieferbar. Länge in m Artikelnummer 6XV1875-5AH10 6XV1875-5AH20 6XV1875-5AH50 6XV1875-5AN10 Für IWLAN-Geräte, die sich in einem Schaltschrank befinden, gibt es eine Schaltschrankdurchführung mit entsprechenden Leitungen.
Deutsch Montieren Mastmontage Verschrauben Sie die Antenne ANT793-6MN mit dem Befestigungs- winkel (Position A in der nachfolgenden Abbildung). Die Mastmontage erfolgt mit den beiden Befestigungsbändern, die zum Lieferumfang der Antenne ANT793-6MN gehören (Position B in der nachfolgenden Abbildung). Betriebsanleitung (kompakt) ANT793-6MN A5E01116925B-03...
Deutsch Anschließen Warnung Lebensgefahr durch Blitzschlag Antennen im Außenbereich müssen sich im Fangbereich eines Blitz- ableiters befinden. Stellen Sie sicher, dass für alle von außen einge- führten leitfähigen Systeme die Möglichkeit eines Blitzschutz- Potenzialausgleichs gegeben ist. Beachten Sie bei der Umsetzung Ihres Blitzschutzkonzepts unbedingt die Anforderungen der Normen VDE 0182 bzw.
English Classification of Safety-Related Notices This manual contains notices which you should observe to ensure your own personal safety, as well as to protect the product and connected equipment. Notices relating to your personal safety are highlighted by a warning triangle; notices relating to property damage only do not have a warning triangle.
Page 22
English Note highlights important information on the product, using the product, or part of the documentation that is of particular importance and that will be of benefit to the user. Installation Instructions (compact) ANT792-8DN A5E01116926B-03...
Page 23
English Contents General safety notices ................ 25 Description................... 27 Installation ................... 29 Connecting up ..................31 Technical specifications ..............32 Dimension drawing ................36 Installation Instructions (compact) ANT792-8DN A5E01116926B-03...
Page 24
English Installation Instructions (compact) ANT792-8DN A5E01116926B-03...
It may only be combined with devices or components of other manufacturers that have been approved and released by Siemens. Correct and safe operation of the device is guaranteed only when it is transported, stored, set up, installed, used and maintained according to the recommendations.
Page 26
English Qualified personnel Only qualified personnel should be allowed to install and work on this equipment. Qualified persons in the sense of the safety-related notices in this manual are defined as persons who are authorized to commission, to ground, and to tag circuits, equipment, and systems in accordance with established safety practices and standards.
Please check that the consignment you have received is complete. If it is not complete or there are signs of external damage, please contact your supplier or your local Siemens office. N-Connect/R-SMA connecting cable The N-Connect/R-SMA male/male flexible connecting cable is available as an accessory for direct connection of the ANT792-8DN to a SCALANCE W-700 or the IWLAN/PB Link PN IO.
Page 28
English N-Connect/ N-Connect connecting cable The N-Connect/N-Connect male/male flexible connecting cable is available as an accessory for connection of the ANT792-8DN to the lightning protector LP798-1N. Length in m Article number 6XV1875-5AH10 6XV1875-5AH20 6XV1875-5AH50 6XV1875-5AN10 There is a control cabinet feedthrough available for IWLAN devices located in a control cabinet.
English Installation Figure 0-1 Options for Mounting the ANT792-8DN Installation Instructions (compact) ANT792-8DN A5E01116926B-03...
Page 30
English Mast mounting There are two ways of mounting the antenna on a mast: • a) Direct To mount the antenna on a mast, use the two securing straps supplied with the ANT792-8DN (position B in the figure above). • b) Indirect using the pipe holder with angle bracket The antenna is mounted with the two securing bands as described in a), it is, however, not directly mounted on the mast but attached...
English Connecting up Warning Danger due to lightning strikes Antennas installed outdoors must be within the area covered by a lightning protection system. Make sure that all conducting systems entering from outdoors can be protected by a lightning protection potential equalization system. When implementing your lightning protection concept, make sure you adhere to the VDE 0182 or IEC 62305 standard.
English Technical specifications Mechanical properties Weight 500 g 200 x 200 x 43 mm Dimensions (width x height x depth) Material Degree of protection IP23 Connector N connector female Storage and operating -40°C ... +80°C temperature Wind resistance 57 N at 160 km/h Silicone-free The antenna ANT792-8DN was developed for outdoor use.
Page 33
English Electrical properties Frequency range 2400 - 2700 MHz Antenna gain 14 dBi Polarization Linear and vertical 3 dB horizontal 35° radiation angle 3 dB vertical radiation angle 30° Impedance 50 Ω VSWR Installation Instructions (compact) ANT792-8DN A5E01116926B-03...