Ps Setup Guide For Winxp; 2Items To Prepare And Points To Note; Items To Prepare And Points To Note; Overview - Canon Color Network Multi-PDL Printer Kit-C1 Service Manual

3.3 PS Setup Guide for WinXP

3.3.1 Overview

The following discussions relate to connection to a network in a Windows XP environment using the PS printer
driver and standard TCP/IP settings:
PS is a PDL used to print on an iR C6800 or iR C6800N from a PC.
- In the case of the iR C6800, this function will become available when a Canon Color Network Multi-PDL Printer
Kit-C1 (optional) is installed. (The function comes as standard with the iR C6800N.)
RAW mode is used for printing through port 9100.
- If the network uses firewall software or uses a router, or it is a WAN or VPN, you must make settings so that port
9100 is valid for use of RAW mode.
- The appropriate settings will automatically be made when printer drivers are installed.

3.3.2 Items to Prepare and Points to Note

You will need the following when installing printer drivers:
Canon Color Network Multi-PDL Printer Kit-C1
(optional for iR C6800; standard for iR C6800N)
- User Software CD-ROM (included with Canon Color Network Multi-PDL Printer Kit-C1)
For more information, see the following documentation that comes with the iR C6800, iR C6800N.
- iR C6800/C6800N [Reference Guide]
- iR C6800/C6800N [Network Quick Start Guide]
- iR C6800/C6800N [Printer Guide] (Included in [User Manual CD-ROM].)

3.3.3 Connecting the Network Cable

Connect the network cable.
<10Base-T/100Base-T>
- Have a LAN cable on hand (straight, for 10Base-T/100Base-T).
- Connect the cable connector to an open port of the HUB.
- Connect the other cable connector to the iR C6800.
Chapter 3
0005-3117
0005-3119
0005-3120
3-49