Long Document Scanning - Canon imageFORMULA DR-G2140 User Manual

CAUTION
If the document is not placed properly inside the carrier sheet,
you may get a document jam or not get a scan image as
intended.
IMPORTANT
• Insert documents straight into the center of the carrier sheet.
Proper scanning will not be possible if the document is too
close to either side, tilted, or protruding from the carrier sheet.
• The maximum thickness of documents that can be scanned in
2
the carrier sheet is 127 g/m
Documents thicker than 127 g/m
malfunctions such as paper jams.
• Carrier sheet is a consumable item. Replace it with a new one
when necessary, if there is visible damage or smudging.
• As a rough guide, replace the carrier sheet after 1,000 scanning
operations with a single 80g/m
(0.15 mm).
2
may cause scanner
2
(22 lb bond) sheet inserted.

Long Document Scanning

Setting the scanner to the Long Document Mode enables scanning
documents up to 5,588 mm long (220") (or up to 3,000 mm (118.11")
with the DR-G2090).
The Long Document Mode can be set with the scanner driver or by the
selecting [Long Document] in User Mode.
Setting with the Scanner Driver
By default, the Long Document Mode is set by the scanner driver.
1
Open the scanner driver's setting screen.
2
In the [Basic] tab, click the [Setting] button of [Page Size]
[Page Size Settings] dialog box will open.
51
(See p. 107)