Advertisement
Product Specification
Model name
Power supply
Power consumption
Reset button
Capacity
Cutting blades
Product Dimension
Resettable fuse button
Resettable
Incorporated to protect the motor from overheating. If the motor shuts off
fuse button
while in use, turn controls to "OFF" and unplug from the wall outlet. Remove
the Jug from the Motor Unit and free the blade of any obstructions. Wait
30 minutes for the unit to cool down. Press external resettable fuse button
on the bottom of the Motor Unit.
Note:
• "Function Switch" is interlock with "Speed Switch", that is to say, when operate "Function Switch",
"Speed Switch" is invalid; and when operate "Speed Switch", "Function Switch" is invalid.
• Turn off the appliance to make it stop working when the Tamper is used during blending.
• The Jug shall not be more than 2/3 full when the Tamper is used during blending.
• Do not use Tamper for more than 30 consecutive seconds (to avoid stressing the motor).
• You may need to move the Tamper not only up and down, but also side to side.
High speed blender_EMF2056.indb 6
High speed blender_EMF2056.indb 6
EM-F2056
220-240V ~ 50/60Hz
1500W
Yes
2.0L
6 stainless steel blades
240*210*490
E-6
Bottom view
10/5/2016 10:29:28 AM
10/5/2016 10:29:28 AM
Advertisement
