6.1.1.7.
Replacement procedures for V-Board
When installing each Board, be careful not to over tighten the Screws. When using an electric driver, use one with an adjustable
torque range. Using too much torque may damage the screw head so that it cannot be tighten
6.1.1.8.
Replacement procedures for Speakers
When installing each part, be careful not to over tighten the Screws. When using an electric driver, use one with an adjustable
torque range. Using too much torque may damage the screw head so that it cannot be tighten.
31
TC-22LR30