Miele CS 1028 G Operating And Installation Instructions page 10

Warning and Safety instructions

While the wok is under warranty repairs should only be
undertaken by a Miele authorised service technician. Otherwise the
warranty is invalidated.

Miele can only guarantee the safety of the appliance when
genuine original Miele replacement parts are used. Faulty
components must only be replaced by Miele spare parts.

The wok is not intended for use with an external timer switch or a
remote control system.

Connection to the gas supply must be carried out by a registered
gas installer. The wok may be connected to the electrical supply by a
fused plug and switched socket. If you wish to connect it to a fused
spur connection, or if the plug has been removed or the connection
cable is not supplied with a plug, the hob must be connected to the
mains supply by a registered electrical worker.

During installation, maintenance and repair work, the wok must be
disconnected from the mains electricity supply. The gas supply must
also be shut off. Depending on territory this is done in one of several
different ways:
– the mains fuse has been disconnected, or
– the screw-out fuse is removed (if applicable), or
– switch off at the wall socket and withdraw the plug from the
socket. Pull by the plug and not by the mains connection cable to
disconnect from the mains electricity supply.
– the gas inlet valve is closed.

Danger of electric shock!
Do not use the wok if it is faulty. Shut off the gas supply and contact
Miele.
10