Sd Card Operation; Bluetooth Operation; Aux-In Operation - Toshiba CD328BT Instruction Manual

4. Press the STOP button on unit or on remote control to stop playing. The display will show
total number of USB and STOP.
5. Proceed program play/repeat play (repeat 1- repeat folder - repeat all)/random play/intro
play operation as the same described in above "CD/MP3 OPERATION".
6. It supports 32GB (USB)
CAUTION:
Do not use any USB extension cable for connecting the USB bar which may cause harmful

interference

SD CARD OPERATION

1. Press the FUNC. button on unit or on remote control to select "CARD" mode.
2. Connect the SD CARD to the SD INPUT. The LCD will show the total number of tracks
stored in the SD CARD. The playback stars from track 1 automatically after reading.
3. To pause playback, press
current playing time will flash on the display.
To resume playback, press
4. Press the STOP button on unit or on remote control to stop playing. The display will show
total number of USB and STOP.
5. Proceed program play/repeat play (repeat 1- repeat folder - repeat all)/random play/intro
play operation as the same described in above "CD/MP3 OPERATION".
6. It supports 32GB (SD CARD)

BLUETOOTH OPERATION

1. Press the FUNC. button on unit or on remote control to switch to BLUETOOTH function, the
LCD will display "bT " and the Pair/Standby indicator will flash at high speed.
2. Turn on the Bluetooth function on the device, scan the unit "TY-CWU500" and connect,
then input the password 0000 if required, the Pair/Standby blue light will light up to indicate
connection done, and the display will show "bt". Press
key on the device to start playback. If the unit can't connect the relative Bluetooth within 2
minutes, press the
3. Rotate the VOLUME knob to your desired level.
4. Press /+10 button or
control to choose the desired track.
5. To stop playback, press
Note: The Bluetooth works best within 10 meters.

AUX-IN OPERATION

1. Press the FUNCTION button on unit or on remote control to select "AUX" mode.
2. Insert the AUX line plug into the AUX IN jack (• 3.5mm) on the player, music from the device
would be amplified and exported from the speakers.
3. Adjust the volume on the unit or on the device to your desired level.
4. Proceed play/pause and next/previous on the device.
/ PAIR button on unit or
/PAIR button on unit or
/PAIR button on unit or PAIR key on remote control to reconnect.
/-10 on the unit or TUN+/
/PAIR button on unit or
key on remote control. The
key on remote control again.
/PAIR button on the unit or play
or TUN-/
key on remote control.
7
key on remote