Page 1
Epson TM-C3400 Color Label Printer Install Guide...
Page 2
Printer Setup – Unbox & Load Ink Cartridge • Unbox printer • Attach power cable • DO NOT attach USB cable • DO NOT power on • Load Ink Cartridge (use starter cartridge first) • Open Front of Ink Cartridge Compartment •...
Page 3
Printer Setup – Load Paper • Loading Roll-Fed Print Media A – Open Front • Compartment • B – Place the label roll with the labels pointing up and close the compartment.
Page 4
Printer Setup – Install Epson Driver • Install Epson TM-C3400 Printer Driver • Please select from the 32Bit or 64Bit Printer Driver • Decompress Drivers\Installation Package • Select Epson TM-C3400 Printer and Press Ok. • Accept Terms and License Agreement.
Page 5
Printer Setup – Configure Epson Driver • Install Epson TM-C3400 Printer Driver • Open Epson printer preferences • Select Add/Del in the Media Layout section...
Page 6
Printer Setup – Configure Epson Driver continued Create new media layout for 4 x 8 UPS Label - Enter Media Layout Name - Using the up/down arrows - Enter 102.0 as shown - Enter 204.5 as shown - Click Add...
Page 7
Printer Setup – Configure Epson Driver continued • At “Media Layout” select …………. 4 x 8 UPS Label………………… from the drop down menu • At “Media Source” select ………. • At “Media Source” select ………. Roll Media - Labels on a roll………...
Page 8
Printer Setup – Configure Epson Driver continued • Click Media Layout Option • Check “Auto fit to Page” • Click OK...
Page 9
Before Leaving New Install • Make sure to remove the starter ink cartridge used for install & testing. Please direct the customer to complete this so you can ensure they have been trained. Also ensure they are clear on reloading labels. •...
Page 11
Printer Setup – Fanfold Configuration • To change from Roll Media to Fanfold Media • Open the fanfold paper cover and remove the paper feed guide. • Open the front paper roll cover.
Page 12
Printer Setup – Fanfold Configuration • To change from Roll Media… continued… • Insert the paper feed guide into the grooves inside the paper roll cover. • Close the paper roll cover. • Turn the printer off. Open the ink cartridge cover. Remove the small rubber grommet.
Page 13
Printer Setup – Configure Driver for Fanfold • At “Media Layout” select …………. 4 x 8 UPS Label………………… from the drop down menu • At “Media Source” select ………. • At “Media Source” select ………. Rear Feed Slot- Fan Fold Labels...
Page 14
Printer Setup – Fan Fold Configuration • Load Label Media (fanfold) • Open Back Compartment of Printer and Feed the Fanfold Labels thru to the front of the printer. Close the back compartment • Power printer on • Once the labels are fed through the front of the printer, press the feed button so the labels are adjusted correctly...
Page 15
Printer Setup – Fanfold to Roll Media • To change from Fanfold Media • Open the front paper roll cover. • Remove the “Paper Feed Guide” from the grooves inside the paper roll cover.
Page 16
Printer Setup – Fanfold to Roll Media • Change from Fanfold Media…continued… • Open the fanfold paper cover and place the paper feed guide. Close fanfold paper cover. • Open the ink cartridge cover. Remove the small rubber grommet. Switch Dip switch 3 to OFF.