Advertisement
Available languages
Available languages
Quick Links
Quick Use Guide
Connecting your DVD recorder to the TV
set/Initial installation
Attention ! Until the initial installation has been completed, the buttons on the front
will not function.
1
Remove the antenna or cable TV signal from your TV. Insert it
into the ANTENNA IN jack at the back of the DVD recorder.
2
Connect one end of the supplied RF coaxial cable to the TV
OUT jack at the back of the DVD Recorder and connect the
other end to the antenna input jack on TV.
3
Connect a video (CVBS) cable to the yellow VIDEO (CVBS)
OUT jacks at the back of the DVD Recorder and to the Video In
jack (usually yellow) of the TV (usually called Video in or AV in.
See your TV's instruction manual).
4
Connect an audio cable to the red/white L AUDIO R OUT jacks
at the back of the DVD Recorder (under VIDEO (CVBS) ) and
to the corresponding red/white audio input jacks of the TV
(usually called 'Audio in' or 'AV in'. See your TV's instruction
manual).
5
Switch on the TV. Switch the TV to the Video/Audio input
channel. For the channel number, please see your TV's instruction
manual.
6
Connect
the
4MAINS at the back of the DVD Recorder and to a power
supply.
The most important features of the DVD Recorder will appear
on the display.
After the initial installation is completed, this function will be
switched off.
7
Switch the DVD-recorder on using STANDBY-ON m .
'IS TV ON?' will appear on the display.
8
If necessary, select the channel number of the input socket at the
TV set.
The initial installation menu appears on the screen.
9
Select your preferred setting using B or A .
Confirm with OK .
After completing the steps mentioned above, follow the OSD (On Screen Display) to complete
the installation.
supplied
power
cable
to
the
mains
jack
IS TV ON?
Initial Setup
Menu Language
English
Español
Français
Press OK to continue
Advertisement
Related Manuals for Philips MRV640/17
Summary of Contents for Philips MRV640/17
- Page 1 Quick Use Guide Connecting your DVD recorder to the TV set/Initial installation Attention ! Until the initial installation has been completed, the buttons on the front will not function. Remove the antenna or cable TV signal from your TV. Insert it into the ANTENNA IN jack at the back of the DVD recorder.
-
Page 2: Programming Recordings
Making a recording If necessary, switch to TV programming by pressing the MONITOR button on the remote. Use CHANNEL+ or CHANNEL- to select the channel you want to record. Recording via the external sockets Select either the front socket ('CAM1') or the socket ('EXT1', 'EXT2') at the back of the recorder, from which the recording is to be carried out using CHANNEL+ or CHANNEL- . - Page 3 Guía rápida Conexión del grabador de DVD al televisor / Instalación inicial ¡Atención! Las teclas del frontal no tendrán ninguna función hasta que no se realice la instalación inicial. Desenchufe el cable de antena del televisor. Introduzca la clavija en la entrada ANTENNA IN en la parte posterior del grabador de DVD.
- Page 4 Realizar una grabación Pulse la tecla MONITOR para ver en pantalla la señal de entrada actualmente seleccionada. Con la tecla CHANNEL+ o CHANNEL- seleccione el número de canal que desea grabar. Grabación mediante clavijas externas Con la tecla CHANNEL+ o CHANNEL- seleccione la clavija frontal ('CAM1') o la clavija ('EXT1', 'EXT2') de la parte posterior, a partir de la cual se va a realizar la grabación.