Advertisement
GOT1000 Startup Guide
GT1020/GT1030-to-FX Connection
Overview:
This document provides a simple guide and reference for setting up the
GT1020 or GT1030 Graphic Operation Terminal (GOT) hardware and
firmware for use with an FX Series PLC.
Hardware Introduction:
The GT1020 and GT1030 are monochrome, 3-color backlight, two
communication channel GOT1000 Series touch panel interfaces, and consist
of the following models:
Model
Size
3.7"
GT1020
160 x
64 dot
4.5"
GT1030
288 x
96 dot
For new GT1020 and GT1030 units, included in the box should be the
GT1020/GT1030 (A), 1 PLC Communication Connector (B), 1 rubber Panel
Mounting Packing (C), and 4 Panel Mounting Brackets (D).
A
Cabling:
Power
All GT1020/GT1030 GOTs except for the GT1020-LBL
and GT1020-LBLW (5V DC versions) require an external 24V
DC power supply to be connected to the Power Terminal on
the back of the GOT. The 5V DC versions are powered
Note: This document is for reference only. For detailed settings and safety information refer to the respective product manual.
Extension
Backlight Colors
LBD
Green/Orange/Red
LBD2
LBDW
White/Pink/Red
LBDW2
LBL
Green/Orange/Red
LBLW
White/Pink/Red
LBD
Green/Orange/Red
LBD2
LBDW
White/Pink/Red
LBDW2
B
Comm. IF
RS-422
RS-232C
RS-422
RS-232C
RS-422
RS-422
RS-232C
RS-422
RS-232C
C
D
2
Ver. A
Power
24V DC
5V DC
24V DC
Advertisement
