How To Use - Panasonic ES-WH90 Operating Instructions Manual

How to use

• The power will not turn on even when pressing the switch with
the AC adaptor connected to the main body.
• The appliance may not operate in an ambient temperature
approximately 5 °C or lower.
1
1
Remove the cap.
2
2
Attach the attachment to suit the area where you
want to use it.
3
3
Press and hold (for approximately 3 seconds)
to turn the power on.
• The power will turn off automatically if the appliance is not
used for approximately 1 minute.
4
4
Press to select the output level.
SELECT
• Level 1 is selected when the power is turned on.
• The level cycles through 1
time the level selector switch is pressed.
• The level indication lamp blinks, and then turns on. (A beep
sounds, indicating that preparation for flash is complete.)
ES-WH90_ASIA.indb 13
2 3 4 5 1...each
5
5
When the level indication lamp
glows, apply the flash switch
closely against the skin and
keep it pressed until flashes.
When the appliance beeps, press the
head perpendicularly against the skin.
• Please do not press too strongly.
• Use the appliance after checking that
there are no other people nearby.
• Light might leak from the air inlet on
the back of the main body when
flashing the treatment area; however,
there will be no problem.
• Points for IPL hair removal
(See this page.)
• When the appliance beeps,
preparation for flash is complete.
6
6
Press to turn the power off.
13
2016/01/20 13:58:31