Sony BDV-F700 Operating Instructions Manual page 19

1
Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
30 mm
Note
• The length and type of the screw are examples. Select screws in accordance with the material or strength of
the wall to which you install the speakers.
2
Fasten the screws to the wall.
8 to 10 mm
3
Hang the speakers on the screws.
Rear of the speaker
Note
• Be careful not to pinch the speaker cords while tightening the screws.
4 mm
Hole on the back of
5 mm
the speaker
10 mm
Hole on the back of
the speaker
5 mm
10 mm
19
GB