Playing Back - Sony CCD-CR1 Operating Instructions (primary manual) Operating Instructions Manual

Playing back

Playing back
You can monitor the playback picture on the LCD screen.
(1) Make sure that the power source is installed. (p. 8, 10)
(2) While pressing the small button on the POWER switch, slide it in the direction
of the arrow. The small button lights up green.
(3) Press 0
(4) Press (
You can also monitor the picture on a TV screen, after connecting the camcorder to a TV
or VCR.
3
4
Adjusting the LCD panel angle
Adjust the LCD panel to the angle you want.
When playing back in the dark
You may find it difficult to view the LCD screen in the dark. We recommend you to
monitor the playback picture on the LCD screen where there is more light.
To turn off the speaker
Slide the SPEAKER ON/OFF switch to OFF. To turn on the speaker, slide it to ON.
20
US
to rewind the tape.
to start playback.
SPEAKER
OFF ON
1
Speaker
2