7.13. Remove the C1-Board
1. Remove the tuner unit. (See section 7.4.)
2. Unlock the cable clampers to free the cable.
3. Remove the flexible cables holder fastening screws (×8
).
4. Disconnect the flexible cables (CB1, CB2, CB3 and CB4).
5. Disconnect the flexible cables (C10 and C11).
6. Remove the screws (×4
42 inch
37 inch
7.14. Remove the C2-Board
1. Remove the tuner unit. (See section 7.4.)
2. Unlock the cable clampers to free the cable.
3. Remove the flexible cables holder fastening screws
(×8
).
4. Disconnect the flexible cables (CB5, CB6, CB7 and CB8).
5. Disconnect the flexible cables (C20 and C21).
6. Disconnect the connector (C23).
7. Remove the screws (×4
42 inch
) and remove the C1-Board.
) and remove the C2-Board.
37 inch
7.15. Remove the front bracket
1. Disconnect the connector (A51). (See section 7.4.)
2. Remove the screws (×4
bracket.
7.16. Remove the G-Board
1. Remove the front bracket. (See section 7.15.)
2. Remove the screws (×2
front.
3. Remove the screws (×3
tor (G51).
4. Remove the G-Board.
22
) and remove the front
) and remove the front shield
) and disconnect the connec-